Metal Fabrication EquipmentHomeAbout UsContact Us
ProductsPress Brakes Hydraulic Shears Hydraulic Presses CNC Back Gauges Custom Metal
Fabrication Equipment
Custom Hydraulic Presses Custom Shears In-House and On-Site Maintenance ServicesGovernment
Inquires Welcome
GSA RegisteredHUB Zone certifiedLongtime supplier of
U.S. Govt. facilities all
over the world
Portfolio Gallery Straightening Presses Travel Frame Presses Special Presses by Standard
Made in the USA
and backed by a
5 Year Parts Warranty
Setting the Standard
for American-Made Metal Fabrication Equipment
Metalworking Equipment > Hydraulic Four Column, C-Frame and Straight Side Presses up to 1,000 tons > C-Frame Presses > Model CC C-Frame Press > Model CC200  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Model CC200, Model CC C-Frame Press



Standard Features
  • All Components Readily Available From Your Local Suppliers
  • Dependable Support from the people who make the machine
  • Typical 20-30 Year Lifetime
  • Hydraulic Tonnage Control
  • Full Tonnage throughout Stroke
  • Counterbalance valve for Punching
  • 5 Year Parts Warranty
  • 5 Year Limited Onsite Labor Warranty
  • Lifetime Unlimited telephone support at no charge
  • Magnetic starter with over and under voltage protection with disconnect switch
  • JIC type electrical components in NEMA 12 enclosures
  • 120 volt control circuit
  • Two hand controls for operator safety
  • ANSI B11.2 standards
  • 230-3-60 or 460-3-60 electrics through 40 h.p., for 50 h.p. and above 460 v. is standard
  • All steel, extremely heavy duty construction
  • All electrics and hydraulics including oil filter are included as standard
  • Simple mechanical limit switches to control open height, speed change point and lower limit actuated by 2 hand palm button control.
  • 3/4" -10 N.C. drilled and tapped holes in the bed are included
  • This style press is perfect for even tonnage applications across the bed and center loading.





Capacity  · Hydraulics  · Frame Specifications  · Features  · Applications  · Model CC C-Frame Press

Capacity

Forming Tons

200 Tons

Punching Tons

100 Tons


Hydraulics

Horsepower

40 hp

Approach Speed

215 in/min

Pressing Speed

24 in/min

Return Speed

105 in/min


Frame Specifications

Open Height

24 in

Stroke

18 in

Closed Height

6 in

Throat Depth

14 in

Between Frames

32 in

Bed Height

38 in

Bed Size

26 x 41 in

Ram Plate Size

20 x 20 in

Weight

24,000 lbs

Height

130 in


Features
  • Hydraulic system with continuous filtration
  • Massive welded frame
  • Large chromed columns
  • T-slots in bed and ram
  • Adjustable shaft packing
  • Adjustable tonnage control
  • Adjustable ram travel
  • 2 hand control station
  • Center and even tonnage loads




Applications
  • Embossing
  • Drawing
  • Stamping
  • Die Try-out
  • Sizing
  • Rubber Pad Forming
  • Forming
  • Swedging
  • Trimming
  • Punching (Due to the overall weight of the ram and the drive system, when punching or blanking with a four column press, you should limit your overall tonnage to 50% unless stroke dampers are used.)
  • Blanking (Due to the overall weight of the ram and the drive system, when punching or blanking with a four column press, you should limit your overall tonnage to 50% unless stroke dampers are used.)




Model CC C-Frame Press
The model CC C-frame press is perfect for applications requiring center-loads or even tonnage across the bed. Available in tonnages from 35 up to 300 tons (larger tonnages available with special quote). A Hydraulic press of this type offers full tonnage throughout the stroke and 3 ram speeds (fast approach, slow press and fast return). This is useful for a variety of work such as forming, punching, drawing plus any other even tonnage application. With exceptional speeds and bed sizes as well long stroke and open height, you will find the base machine to fit most customer requirements.

Standard Industrial offers the model CC with a non-guided ram versus our heavier DC model press with box-guided ram for when off-center or uneven tonnages are expected. The model CC comes with a heavy duty ram plate attached to the cylinder rod with (2) 5/8” t-slots machined as well as (2) t-slots in the bed. The ram plate can also have additional slots and/or drilled and tapped holes added for tool mounting. There are a wide variety of options to choose from as well to customize the press to your exact needs.

100% made in the USA with our unmatched 5 year parts warranty plus a lifetime of readily available parts all from your local suppliers. You will never have another “orphaned” machine due to an overseas manufacturer who can’t get you parts or a domestic manufacturer with proprietary parts that forces you to buy everything from them. With Standard Industrial you will always be able to get the part you need for the lifetime of the machine from any number of sources available to you.



 DOWNLOADS 

Hydraulic Press Literature
(PDF, 1614KB)


© 2020, Standard Industrial Company Site created by Thomas Web Solutions and powered by Navigator Platform