Metal Fabrication EquipmentHomeAbout UsContact Us
ProductsPress Brakes Hydraulic Shears Hydraulic Presses CNC Back Gauges Custom Metal
Fabrication Equipment
Custom Hydraulic Presses Custom Shears In-House and On-Site Maintenance ServicesGovernment
Inquires Welcome
GSA RegisteredHUB Zone certifiedLongtime supplier of
U.S. Govt. facilities all
over the world
Portfolio Gallery Straightening Presses Travel Frame Presses Special Presses by Standard
Made in the USA
and backed by a
5 Year Parts Warranty
Setting the Standard
for American-Made Metal Fabrication Equipment
Metalworking Equipment > Hydraulic Four Column, C-Frame and Straight Side Presses up to 1,000 tons > C-Frame Presses > Model DC C-Frame Press > Model DC400  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Model DC400, Model DC C-Frame Press



Standard Features
  • All Components Readily Available From Your Local Suppliers
  • Dependable Support from the people who make the machine
  • Typical 20-30 Year Lifetime
  • Hydraulic Tonnage Control
  • Full Tonnage throughout Stroke
  • Counterbalance valve for Punching
  • 5 Year Parts Warranty
  • 5 Year Limited Onsite Labor Warranty
  • Lifetime Unlimited telephone support at no charge
  • Magnetic starter with over and under voltage protection with disconnect switch
  • JIC type electrical components in NEMA 12 enclosures
  • 120 volt control circuit
  • Two hand controls for operator safety
  • ANSI B11.2 standards
  • 230-3-60 or 460-3-60 electrics through 40 h.p., for 50 h.p. and above 460 v. is standard
  • All steel, extremely heavy duty construction
  • All electrics and hydraulics including oil filter are included as standard
  • Simple mechanical limit switches to control open height, speed change point and lower limit actuated by 2 hand palm button control.
  • 3/4"-10 N.C. drilled and tapped holes in the bed are included
  • This style press has superior ability to withstand off-center loading both front to back and left to right.





Specifications  · Features  · Applications  · Model CC C-Frame Press

Specifications

Forming Tons

400 Tons

Punching Tons

260 Tons

Ram Size

24 x 29 in

Bed Size

30 x 50 in

Throat Depth

16 in

Between Housings

34 in

Open Height

24 in

Stroke

12 in

Closed Height

12 in

Approx. Weight

56,000 lbs

Speed Approach-Press-Return

180-22-174 in/min

Loading Applications

View
Center
Front to Back

Left to Right loading

Off-Center


Features
  • Self-contained hydraulic system with oil cooler and filter
  • Full length EIGHT way ram guides
  • T-slots in the bed and ram
  • Two hand control station
  • A counterbalance valve for punching and a decompression system for bottoming applications are standard equipment on all Standard Industrial presses
  • Machine tool quality direct hydraulic cylinder
  • Box type ram
  • Adjustable shaft packing
  • Tonnage control
  • Completely adjustable open height, stroke and speed change point
  • Extremely heavy duty welded frames




Applications
  • Embossing
  • Drawing
  • Stamping
  • Die Try-out
  • Sizing
  • Rubber Pad Forming
  • Forming
  • Swedging
  • Trimming
  • Punching (Due to the overall weight of the ram and the drive system, when punching or blanking with a four column press, you should limit your overall tonnage to 50% unless stroke dampers are used.)
  • Blanking (Due to the overall weight of the ram and the drive system, when punching or blanking with a four column press, you should limit your overall tonnage to 50% unless stroke dampers are used.)




Model CC C-Frame Press
The model CC C-frame press is perfect for applications requiring center-loads or even tonnage across the bed. Available in tonnages from 35 up to 300 tons (larger tonnages available with special quote). A Hydraulic press of this type offers full tonnage throughout the stroke and 3 ram speeds (fast approach, slow press and fast return). This is useful for a variety of work such as forming, punching, drawing plus any other even tonnage application. With exceptional speeds and bed sizes as well long stroke and open height, you will find the base machine to fit most customer requirements.

Standard Industrial offers the model CC with a non-guided ram versus our heavier DC model press with box-guided ram for when off-center or uneven tonnages are expected. The model CC comes with a heavy duty ram plate attached to the cylinder rod with (2) 5/8” t-slots machined as well as (2) t-slots in the bed. The ram plate can also have additional slots and/or drilled and tapped holes added for tool mounting. There are a wide variety of options to choose from as well to customize the press to your exact needs.

100% made in the USA with our unmatched 5 year parts warranty plus a lifetime of readily available parts all from your local suppliers. You will never have another “orphaned” machine due to an overseas manufacturer who can’t get you parts or a domestic manufacturer with proprietary parts that forces you to buy everything from them. With Standard Industrial you will always be able to get the part you need for the lifetime of the machine from any number of sources available to you.



 MORE IMAGES 

·  Model DC C-Frame Press

·  Model DC C-Frame Press (DC400/DC500/DC600) - 1


 DOWNLOADS 

Hydraulic Press Literature
(PDF, 1614KB)



 Standard Features, Options for Model AP, DC, DCSS and AM Presses 


Standard Features for Model AP, DC, DCSS and AM Presses
Standard Features for Model AP, DC, DCSS and AM Presses


Die Cushions Mounted Under Press Bed
Available Options for Model AP, DC, DCSS and AM Presses

© 2020, Standard Industrial Company Site created by Thomas Web Solutions and powered by Navigator Platform